Translations for our friends around the world.

The Flight Sim Store Warning!!!!

The Flight Sim Store Warning!!!!



http://www.flightsimstore.com/

This store is not processing transactions properly.
They have been ignoring customer emails/tickets.
Quite a few Flight Sim devs have removed their products from this store.


I am NOT buying from them at this point. BEWARE!

Author Topic: JoinFS  (Read 4156 times)

0 Members and 1 Guest are viewing this topic.

Offline Asid

  • HAVOC
  • *
  • Posts: 14990
Re: JoinFS
« Reply #15 on: July 12, 2017, 03:25:02 AM »
Updated to 1.2.5


Changelog

Version 1.2.5

Compatible with 1.2.3.
Added setting for disabling automatic elevation correction.


Download (1.5MB):HERE

I stand against Racism, Bigotry and Bullying

Offline Asid

  • HAVOC
  • *
  • Posts: 14990
Re: JoinFS
« Reply #16 on: September 01, 2017, 06:10:37 PM »
Updated to 1.2.6


Changelog

Version 1.2.6

   Compatible with 1.2.5.
   New option in File|Settings for the automatic refresh of open views.
   IP addresses are now encoded. See manual.
   Model scan settings for sub-folders and additional folders is now remembered for subsequent scans.


Download (1.5MB):HERE

I stand against Racism, Bigotry and Bullying

Offline Asid

  • HAVOC
  • *
  • Posts: 14990
Re: JoinFS
« Reply #17 on: September 06, 2017, 05:48:43 PM »
Updated to 1.2.7


Changelog

Version 1.2.7

   Compatible with 1.2.6.
   Fixed 'Invalid index' error on auto refresh.
   Fixed the Join button on the hub and bookmark views when JoinFS is already connected. It now connects to the newly selected hub.


Download (1.5MB):HERE

I stand against Racism, Bigotry and Bullying

Offline Asid

  • HAVOC
  • *
  • Posts: 14990
Re: JoinFS
« Reply #18 on: October 23, 2017, 09:06:12 PM »
Updated to 1.2.8


Changelog

Version 1.2.8

   Incompatible with all previous versions (except recordings.)
   All smoke entries (up to 99) are now synchronized. These are sometimes used for animations on some aircraft add-ons.
   Fuel tank levels are now synchronized.
   Payload weights (up to 20) are now synchronized.
   Heading indicator is now synchronized.
   Fixed local network connections. Can now connect to a LAN client or hub session directly using local IP address. All users should be visible.
   Reduced load on Simconnect by changing the way that data updates are done.
   Renewed software certificate.
   Whazzup file now updated every second.
   Removed confusing letters from the permissions window. They do not represent key presses, but are displayed in the permissions column.
   Removed the dash character from the address format to make it more legible. Format is now "12345 67890", or "12345 67890 6112" if including the port.
   Permanently removed the system tray feature. It was not actually getting processed as intended. You can still minimize JoinFS to the task bar.


Download (1.5MB):HERE

I stand against Racism, Bigotry and Bullying

Offline Asid

  • HAVOC
  • *
  • Posts: 14990
Re: JoinFS
« Reply #19 on: October 30, 2017, 04:54:22 PM »
Updated to 1.2.10


Changelog

Version 1.2.10
   Compatible with 1.2.9.
   Fixed a problem with the propagation of the hub list. Some users, particularly new users may not have seen the full list.

Version 1.2.9
   Compatible with 1.2.8.
   Autopilot states are now synchronized.
   DME selector is now synchronized.
   Altimeter is now synchronized.
   Reorganized shared cockpit control groups. Engine now part of Flight. Second group includes gear, flaps. Third is navigation and autopilot.
   Added support for Third Party Events from 0x11000 - 0x1100A.
   Dead objects should now expire and get deleted.
   Improved messages in the monitor window to aid problem solving.
   Settings - Port, Enable Hub Mode and Whazzup are now independant for the test build. Allows both stable and test builds to run concurrently.
   Fixed crash when clicking View Logs before a log has been saved.


Download (1.5MB):HERE

I stand against Racism, Bigotry and Bullying

Offline Asid

  • HAVOC
  • *
  • Posts: 14990
Re: JoinFS
« Reply #20 on: November 16, 2017, 03:58:47 AM »
X-Plane beta testing.

Quote
Postby Peter Sun Nov 12, 2017 2:45 pm

The latest test build is the first version of JoinFS to support X-Plane. It should be functional, with the exception of some shared cockpit features, which will be added shortly. This is basically a chance to get some testing done and feedback on the work done so far.

Please read these notes, http://pmem.uk/joinfs/manual.html#xplane, before trying it out.

If you are unfamiliar with the test build, please read this, http://pmem.uk/joinfs/forum/viewtopic.php?f=2&t=491

Thanks for all your patience so far to those waiting for X-Plane support. I agree that it needed doing. Hopefully the wait will soon be over.

Peter

I stand against Racism, Bigotry and Bullying

Offline Asid

  • HAVOC
  • *
  • Posts: 14990
Re: JoinFS
« Reply #21 on: November 20, 2017, 03:38:45 PM »
Updated to 1.3.3


Changelog

Version 1.3.3
   Compatible with 1.3.2.
   Requires reinstallation of the X-Plane plugin from 'File|Settings'.
   Changed the way X-Plane multiplayer slots are allocated, which should fix the colocated aircraft bug and the stuttering on model loading.
   Removed incorrect colon character from the port number in the 'Me' box.

Version 1.3.2
   Compatible with 1.3.1.
   Had to rename model matching file. Rescan required. If you wish to keep your old match settings, please copy+paste them from the 'matching' text files in '\AppData\Local\JoinFS\' folder.
   Fixed error message "Failed to initialize SimConnect".

Version 1.3.1
   Compatible with 1.3.0.
   No longer crashes and runs normally when SimConnect is not installed on the user's system. Useful for X-Plane users and dedicated JoinFS servers.
   Attempted fix for crash when clicking the Browse button.
   Fixed compass gyro synchronization.
   Attempted fix for occasional desynched controls.
   Separate log files for stable and test builds.

Version 1.3.0
   Compatible with 1.2.10.
   X-Plane support (see manual).
   Possible fix for P3D and shared cockpit control issues. It's a related issue that may have been the cause of those problems.
   Fixed floating aircraft that occurred in certain circumstances.




Download (1.6MB):HERE

I stand against Racism, Bigotry and Bullying

Offline Asid

  • HAVOC
  • *
  • Posts: 14990
Re: JoinFS
« Reply #22 on: December 02, 2017, 02:00:51 PM »
Updated to 1.3.6


Changelog

Version 1.3.6
   Compatible with 1.3.5.
   Fixed aileron and rudder trim sychronization. Probable fix for banking aircraft bug.
   Fixed smoke from switching off after a few seconds.
   X-Plane - Fixed disconnects while a user is in the X-Plane UI.
   JoinFS version and simulator are now shown for each user in the user list.

Version 1.3.5
   Compatible with 1.3.4.
   Modified the bookmark entry window to suit the new address format.
   Fixed issue where out of range aircraft initially get injected and then removed.
   Fixed corrupt log messages.

Version 1.3.4
   Compatible with 1.3.3.
   Fixed bug preventing X-Plane shared cockpit.
   Detailed logging option in monitor window. Primarily to help solve the engine cut-out bug.
   New method employed for elevation correction. P3D/FSX only.
   X-Plane aircraft change is now reflected in JoinFS.
   Changed option 'Show empty hubs' to 'Show offline hubs'. Means that event notifications are visible to more people and there is less risk of concentrating users on certain hubs.
   JoinFS now closes when clicking on 'New Version Available' link.



Download (1.6MB):HERE

I stand against Racism, Bigotry and Bullying

Offline Asid

  • HAVOC
  • *
  • Posts: 14990
Re: JoinFS
« Reply #23 on: December 11, 2017, 10:29:44 PM »
Updated to 1.4.3


Changelog

Version 1.4.3
   Compatible with 1.4.2.
   Fixed crash on 'Browse' button during model scan.
   Fixed problem with empty address bookmarks.
   Fixed X-Plane shared cockpit controls - alternator, lights, throttle, prop, mixture.
   Fixed multi-threading issues.
   Comms window help message.
   Comms window, user list now uses channel colours to show a user's last transmission channel.

Version 1.4.2
   Compatible with 1.4.1.
   Fixed crash when a hub client opens the hub list.

Version 1.4.1
   Compatible with 1.4.0.
   Please be vigilant for bugs and performance changes in this version due to the changes involved.
   Major restructuring of the multi-threaded code - possible fix for the P3Dv4 engine cut-off bug.
   Weather update fix. (Weather still needs a bit of an overhaul.)
   Comms user list is now populated for global users that have the comms window open.

Version 1.4.0
   Compatible with 1.3.9.
   Separate X-Plane plugin port for the TEST build and an enable option in settings.
   Comms fix for the history expire time.
   Ignore contact from the comms window.
   Modified comms window colours.

Version 1.3.8
   Compatible with 1.3.7.
   Fixed X-Plane plugin version.

Version 1.3.7
   Compatible with 1.3.6.
   Fixed user list, ignore and connected columns.
   Changed user list simulator column to show 'Not Connected' instead of 'Unknown'.
   Groundwork for text-based global comms channel.



Download (1.6MB):HERE

I stand against Racism, Bigotry and Bullying

Offline Asid

  • HAVOC
  • *
  • Posts: 14990
Re: JoinFS
« Reply #24 on: February 27, 2018, 01:36:42 PM »
Updated to 1.4.9


Changelog

Version 1.4.9
   Compatible with 1.4.8.
   German and Italian language support.
   Automatic model scan on connecting to the simulator. Can be disabled in the settings.
   Fixed 'FileNotFound' crash when SimConnect is not installed.
   Fixed auto broadcast. Option has been moved from 'Settings' to the aircraft list's 'Broadcast' options.
   Fixed ignore option in the aircraft list for local aircraft.
   Fixed incorrect autopilot altitude about FL320.
   Model matching data now cleared when disconnecting from the simulator.

Version 1.4.8
   Compatible with 1.4.7.
   X-Plane should now be working as it was in 1.4.3.
   Shared cockpit should now be working as it was in 1.4.3.
   Fixed smoke problem - no smoke was transmitted on some clients due to initialization issue.
   Control surfaces and brakes updated as variables on network aircraft. Should have been done in 1.4.6.

Version 1.4.7
   Compatible with 1.4.6.
   Lights and avionics re-enabled on network aircraft.
   Fixed incorrect data types. May have been responsible for a reported crash.
   Shared cockpit and X-Plane will be fixed in the next version.

Version 1.4.6
   Not compatible with previous versions.
   Note: This version is only intended for testing of the Prepar3D v4 engine cut-off bug.
   Note: some functionality is broken in this version, shared cockpit, lights, X-Plane.
   Overhaul of the aircraft update mechanism.
   Reciprocating and turbine engines are now handled separately. More data is synced in both cases.
   Additional rotorcraft data synced, rotor brake, clutch, gov switch, lateral trim, turbine engine.

Version 1.4.4
   Compatible with 1.4.3.
   Workaround for the engine cut-off Prepar3D v4 bug.
   Customizable indicator colours. See File|Settings.
   Reordered the user list columns for convenience.
   Fixed bug with some encoded addresses.
   Fixed problem when using the hub/bookmark 'Join' buttons while currently connected.
   Permission button on the user list now disabled for self.
   Changed the default button on the main window to the 'Join' button instead of 'Auto Join'.


Download (1.6MB):HERE

I stand against Racism, Bigotry and Bullying

Offline Asid

  • HAVOC
  • *
  • Posts: 14990
Re: JoinFS
« Reply #25 on: March 13, 2018, 01:48:03 PM »
Updated to 1.4.10


Changelog

Version 1.4.10

   Compatible with 1.4.9.
   German langauge fixes.
   Fixed duplicate entries in Edit Model Matching window.
   Fixed hub user list.
   Changed some shared controls back to event updates.


Download (1.6MB):HERE

I stand against Racism, Bigotry and Bullying

Offline Asid

  • HAVOC
  • *
  • Posts: 14990
Re: JoinFS
« Reply #26 on: April 01, 2018, 12:04:48 PM »
Updated to 1.4.12


Changelog

Version 1.4.12
   Compatible with 1.4.11.
   Fixed shared cockpit zero fuel burn issue.
   Fixed duplicated entries in user/aircraft/whazzup lists.
   Fixed some hub sessions becoming merged together.

Version 1.4.11
   Compatible with 1.4.10.
   German langauge fixes.
   Moved heading, altitude, speed, wind into the main aircraft list for easier reference.
   Fixed animations on some aircraft, and slight wobbling in the aircraft pitch. (broken in 1.4.10).


Download (1.6MB):HERE

I stand against Racism, Bigotry and Bullying

Offline Asid

  • HAVOC
  • *
  • Posts: 14990
Re: JoinFS
« Reply #27 on: June 26, 2018, 01:44:37 AM »
Updated to 1.4.13


Changelog

Version 1.4.13
   Compatible with 1.4.12.
   Fixed absent AI aircraft in aircraft list.


Download (1.6MB):HERE

I stand against Racism, Bigotry and Bullying