Announcing the TFDi Design MD-11

[Asid]

Update
25 May 2024


From the dev:

We're happy to announce that we've sent out the feature complete (beta) build to the Collector's Edition customers.

We still have quite a few items to work on, but the list between here and release is shrinking quickly.

For a full changelog to see the progress, please see here: https://docs.invernyx.com/en/md11/changelog

Thank you for your continued patience - we're almost there.

Collin Biedenkapp

[Asid]

This is the announcement you've been waiting for.

The MD-11 will be available for public download on July 2nd 2024.

Preorders will be stopped at the end of the Flight Sim Expo.

@MD-11 Presale Edition Customer will be able to preload early next week and on release there will likely be a small patch to activate the aircraft.

https://md11.tfdidesign.com/status/

[Asid]

From the devs
06/27/2024

It is my utmost pleasure to announce to you all today that we have just began the preloads of the TFDi Design MD-11. To download your aircraft you will need to go into your Client Area and download our MD-11 Installer from your ‘Active Products and Services’  tab. All that is left to do then is set the download running!

I would like to acknowledge that we are a day late on the Preloads, this was due to some last minute tweaking and QA that needed to be done before we could be 100% happy to ship the build. This will NOT effect the release date of July 2nd.

**Can I fly it today?**

No, this is just the preload phase, on July 2nd a small update will be released that will activate your aircraft and allow you to take it into the skies! To obtain the update, simply run the installer again and it will automatically check for updates.

Collectors Edition already have access to this update, and will continue to receive updates early to help us with the testing and evaluation process.

**What happens on July 2nd?**

On July 2nd there will be a small update for the MD-11 Presale customers that will allow them to activate the aircraft and fly it!

If you have not purchased the presale then July 2nd will be like any product release day, once the aircraft is out you will be able purchase and download the aircraft.


**What happens after July 2nd?**

Once the aircraft is released, the work does not stop. We will continue to tweak and update the MD-11, the Pratt and Whitney engines will come shortly after the 2nd. We are estimating to have the Extended Simulation complete and released by the end of this year. However , as always, we will not rush it out to meet an arbitrary deadline.

[Asid]

The MD-11 will be released to the public on July 2nd 2024. Preloads are available now!
Jun 29, 2024

Community member and presale customer 'JamniorMarinero' created the backing music for this and it has been used with their permission.

[Asid]

TFDi Design MD-11 Released!
Tuesday, 2nd July, 2024



The TFDi Design MD-11 is now available!

A few moments ago, we pushed the update to the MD-11 that will activate it for all of our Presale customers and the aircraft is now available for purchase! After four and a half years of development, the team is proud to announce that the TFDi Design MD-11 is now available.

How much will it cost?
The pricing structure of the MD-11 will follow an a-la-carte system allowing you to purchase exactly what you want.

The base package will either be the Passenger or the Freighter and will be $69.99.
The expansion package (the variant you have not purchased already) will be $9.99.
The Extended Simulations package will be $4.99 (this is coming at a later date).

What happens next?
Work will continue on the MD-11 to squash any bugs that arise after release, we will also be working to bring the Pratt and Whitney engines to the sim as soon as possible. We will also be working on the Extended Simulation package which will add failures and give you an even greater depth of MD-11 simulation.

Where can I download liveries and the Paint Kit:
All of our official liveries and our Paint Kit can be downloaded from the Downloads section of the website.

Thank you for all of your support on this project - we wish you many happy flights in the TFDi Design MD-11!

---
TFDi Design
http://tfdidesign.com

[Asid]

FSiPanel for the TFDI MD11
3 July 2024

To celebrate the launch of the TFDi Design MD-11 TFDi have teamed up with the team over at FSiPanel to incorporate their systems with our aircraft!

For 24 hours they are offering 20% off with code: FSTFDIMD11

Get FSiPanel 2020: https://www.fsipanel.com

JP has published a video below:





Discover how to fly a quick and efficient traffic pattern using FSiPanel 2020 Advanced Edition and the TFDi Design MD11. In this video, I demonstrate the seamless process from sitting on the runway to being fully configured for a left-hand pattern at KBOS 22L. Watch as FSiPanel sets up all necessary parameters, making the setup process swift and easy. Ideal for both training and quick simulation sessions.

[Asid]

MD-11 Updated to Version 1.0.7
17 July 2024



TFDI have just pushed their first major update to the MD-11! Version 1.0.7 is now available to be downloaded through the MD-11 Installer. The full changelog can be found below

1.0.7 (17 July 2024)

    ➕ ADDED - Realistic parking brake engagement logic and option
    ➕ ADDED - Altimeter sync setting and functionality
    ➕ ADDED - AILERON DEFLECT OVRD code (button does not yet function)
    🔧 FIXED - T/O THRUST activating with ATS off
    🔧 FIXED - RCWS causing permanent outboard aileron lockout
    🔧 FIXED - PROF TO not showing in meters when meters are selected
    🔧 FIXED - (P3D) Default GPWS conflict
    🔧 FIXED - VS/FPA button in P3D
    🔧 FIXED - Lack of fuel not causing engines to flame out
    🔧 FIXED - Lack of fuel not causing APU to flameout
    🔧 FIXED - Edge case crash in CAWS system caused by ADC power loss
    🔧 FIXED - Spoiler toggle event only extending spoiler
    🔧 FIXED - Engine start possible without air source
    🔧 FIXED - Invalid RTE RSV FUEl entry when entered by weight
    🔧 FIXED - VOR/ADF needles instantly snapping to values
    🔧 FIXED - Canadian altimeter setting in MSFS EFB
    🔧 FIXED - Missing FD1/FD2 annunciation on PFD
    🔧 FIXED - CAWS alert power requirements
    🔧 FIXED - MASTER WARNING/MASTER CAUTION/SD cue lights activating without DEU power
    🔧 FIXED - ABS DISARM light not coming on when initially selecting AUTOBRAKE TO
    🔧 FIXED - Windshield wiper INT behavior
    🔧 FIXED - Windshield wiper timing
    🔧 FIXED - AP heading bug not following aircraft heading on ground
    🔧 FIXED - Brake behavior and baro sync options not being retained properly
    🔧 FIXED - P3D EFB maximum fuel value not matching
    🔧 FIXED - AUTOPILOT alert not playing on startup
    🔧 FIXED - EVAC switch behavior with respect to the guard
    🔧 FIXED - GPWS OVRD switch/guard not playing sound
    🔧 FIXED - EVAC switch/guard not playing sound
    🔧 FIXED - (P3D) EFB not applying DEFLECTED AILERON setting
    🔧 FIXED - Horizontal alignment of vertical FMA
    🔧 FIXED - Pitch stability and pitch trim flight performance
    🔧 FIXED - ER buttons not animating
    🔧 FIXED - Chocks preventing brake actuation
    🔧 FIXED - PIP pylons not working
    🔧 FIXED - Wingflex-related visual issue
    🔧 FIXED - Gear handle release button not working
    🔧 FIXED - Deflected aileron button not working
    🔧 FIXED - Backward strobe lights
    🔧 FIXED - Missing wingtip nav light
    🔧 FIXED - Missing strobe ground flash
    🔧 FIXED - Deflected aileron override button appearing with option disabled
    🔧 FIXED - Gear handle animation
    🔧 FIXED - Strobe timing
    🔧 FIXED - (P3D) Hoppie code not displaying after saving
    🔧 FIXED - Avionics fan starting without A/C power
    🔧 FIXED - Oil pressure alert during startup
    🔧 FIXED - Cabin lighting brightness
    🔧 FIXED - MIN PROF not being reset by changing approach
    🔧 FIXED - A scenario causing v-speeds to be reset
    ✏️ CHANGED - Included current panel states
    ✏️ CHANGED - Changed TCAS altitude calculation to attempt to resolve erroneous altitude reporting
    ✏️ CHANGED - Improved display startup timing
    ✏️ CHANGED - Certain EFB settings saving to the airframe instead of user settings

[Asid]

TFDi Design MD 11 New GE CF6 Sounds
25 Oct 2024

[Asid]

MD-11 Status
Friday, 25th October, 2024

We've been working on a few significant areas of the MD-11, albeit a little more behind the scenes than usual. First up, we've been working with Echo 19 to overhaul the sound packages. There have been numerous improvements, including:

    -Brand new recordings for the interior sounds.
    -Improved volume for mechanical sounds
    -Pack sound in the cabin
    -Added location to cockpit sounds so they are no longer audible in the cabin
    -Fixed APU sound location
    -Improved ground roll sounds
    -Improved wind sounds
    -Improved overall balance, stereo field, etc.

That update has just been made available to everyone, so we're happy to hear everyone's feedback over the coming days! Please note, most of these sound updates are MSFS-specific.

TFDi Design MD 11 New GE CF6 Sounds




Behind the scenes, art has still been hard at work on overhauling the exterior. The update is taking longer than expected because Ozzy has been going over the model itself with a fine-toothed comb. We've included a few pictures that show new enhanced physical detail on the models. Various improperly shaped parts have been improved, missing ports and smaller objects have been added, and the overall detail and mapping has been improved. It'll soon be off to Cameron and Miguel for the updated paint and texture work to round out the update.

Read on...https://tfdidesign.com/index.php/announcements/29/Development-Update-October-2024.html