Translations for our friends around the world.

Click on banner for Tacview website

Author Topic: dcs.log is filled with TACVIEW.DLL INFO type of log  (Read 157 times)

0 Members and 1 Guest are viewing this topic.

Offline aemvee

  • New member
  • *
  • Posts: 3
dcs.log is filled with TACVIEW.DLL INFO type of log
« on: January 08, 2020, 09:15:24 PM »
Hi, I have tacview running on a DCS running headless. Is it possible to change verbose level of the Tacview entries to dcs.log so that INFO would be omitted? Or is there a reason why it fills the log like that and what I have missed?

Code: [Select]
...
2020-01-08 21:03:18.343 INFO    TACVIEW.DLL:  DCS GetWorldObjects is taking 10.8% of CPU
2020-01-08 21:03:18.343 INFO    TACVIEW.DLL:     Tacview recorder is taking  0.6% of CPU
2020-01-08 21:03:18.348 INFO    TACVIEW.DLL: During the last 0.0s an average of 427 units objects and 0 ballistic objects have been active per frame
2020-01-08 21:03:18.348 INFO    TACVIEW.DLL: The average frame rate of 181.8fps would have been 625.2fps if the flight data recorder was disabled
2020-01-08 21:03:18.348 INFO    TACVIEW.DLL: DCS World simulation is taking 29.1% of CPU
2020-01-08 21:03:18.348 INFO    TACVIEW.DLL:  DCS GetWorldObjects is taking 65.0% of CPU
2020-01-08 21:03:18.348 INFO    TACVIEW.DLL:     Tacview recorder is taking  5.9% of CPU
2020-01-08 21:03:18.375 INFO    TACVIEW.DLL: During the last 0.0s an average of 427 units objects and 0 ballistic objects have been active per frame
2020-01-08 21:03:18.375 INFO    TACVIEW.DLL: The average frame rate of 37.5fps would have been 42.8fps if the flight data recorder was disabled
2020-01-08 21:03:18.375 INFO    TACVIEW.DLL: DCS World simulation is taking 87.5% of CPU
2020-01-08 21:03:18.375 INFO    TACVIEW.DLL:  DCS GetWorldObjects is taking 11.5% of CPU
...

Offline BuzyBee

  • Tacview
  • *
  • Posts: 23
    • Tacview
Re: dcs.log is filled with TACVIEW.DLL INFO type of log
« Reply #1 on: January 13, 2020, 04:34:56 PM »
That IS too many entries in the log. I will look into it and let you know!

Offline BuzyBee

  • Tacview
  • *
  • Posts: 23
    • Tacview
Re: dcs.log is filled with TACVIEW.DLL INFO type of log
« Reply #2 on: January 14, 2020, 05:15:33 PM »
Can you please send me the whole log? By PM or by email at support @ tacview.net please

Offline aemvee

  • New member
  • *
  • Posts: 3
Re: dcs.log is filled with TACVIEW.DLL INFO type of log
« Reply #3 on: January 15, 2020, 02:13:39 PM »
Of course. It's in the mail. It would be great to have option to disable all INFO and still show ERROR, WARNING messages.

Offline BuzyBee

  • Tacview
  • *
  • Posts: 23
    • Tacview
Re: dcs.log is filled with TACVIEW.DLL INFO type of log
« Reply #4 on: January 17, 2020, 01:55:54 PM »
I didn't receive anything yet. I was going to check your profiling period. Default is 600 (seconds). If yours is set to 0 for some reason it could cause the issue you are describing.

TACVIEW.DLL: Config={bookmarkShortcut=0, clientTelemetryPassword="", compressionLevel=0, dataRecordingEnabled=1, debugModeEnabled=1, hostTelemetryPassword="",
playbackDelay=0, profilingPeriod=600, realTimeTelemetryPort=42674, recordClientsSessionsEnabled=0, remoteControlPassword="", remoteControlPort=42675}

Offline aemvee

  • New member
  • *
  • Posts: 3
Re: dcs.log is filled with TACVIEW.DLL INFO type of log
« Reply #5 on: January 19, 2020, 09:37:18 AM »
Sorry to hear that, I can send it again when Im back at computer. But now that you mentioned profilingPeriod=600. I had adjusted it not realizing what it did, well it's obvious now. I was trying to mitigate the 10min delay and felt that the playbackdelay setting didn't change anything. But with most recent version and cprrect settings everything works as it should.

Thank you

 

Useful Info/links

Started by AsidBoard Naval Action

Replies: 7
Views: 4128
Last post July 30, 2015, 08:52:17 PM
by Asid
Scourge of War: Waterloo Price & Release info

Started by AsidBoard Scourge Of War

Replies: 0
Views: 1273
Last post June 07, 2015, 08:47:59 PM
by Asid
OUTDATED **Official D.O.W. ArmA3 server info **

Started by AsidBoard ArmA

Replies: 0
Views: 2304
Last post August 01, 2015, 08:08:53 PM
by Asid
Unit Info Screen

Started by choppinltBoard Theater of Operations: World at War

Replies: 3
Views: 1810
Last post October 09, 2015, 03:16:49 PM
by A Canadian Cat
New Unit Info Screens

Started by choppinltBoard Theater of Operations: World at War

Replies: 3
Views: 2033
Last post December 10, 2015, 07:21:48 PM
by Attila