Forum > DCS World
dcs.log is filled with TACVIEW.DLL INFO type of log
aemvee:
Hi, I have tacview running on a DCS running headless. Is it possible to change verbose level of the Tacview entries to dcs.log so that INFO would be omitted? Or is there a reason why it fills the log like that and what I have missed?
--- Code: ---...
2020-01-08 21:03:18.343 INFO TACVIEW.DLL: DCS GetWorldObjects is taking 10.8% of CPU
2020-01-08 21:03:18.343 INFO TACVIEW.DLL: Tacview recorder is taking 0.6% of CPU
2020-01-08 21:03:18.348 INFO TACVIEW.DLL: During the last 0.0s an average of 427 units objects and 0 ballistic objects have been active per frame
2020-01-08 21:03:18.348 INFO TACVIEW.DLL: The average frame rate of 181.8fps would have been 625.2fps if the flight data recorder was disabled
2020-01-08 21:03:18.348 INFO TACVIEW.DLL: DCS World simulation is taking 29.1% of CPU
2020-01-08 21:03:18.348 INFO TACVIEW.DLL: DCS GetWorldObjects is taking 65.0% of CPU
2020-01-08 21:03:18.348 INFO TACVIEW.DLL: Tacview recorder is taking 5.9% of CPU
2020-01-08 21:03:18.375 INFO TACVIEW.DLL: During the last 0.0s an average of 427 units objects and 0 ballistic objects have been active per frame
2020-01-08 21:03:18.375 INFO TACVIEW.DLL: The average frame rate of 37.5fps would have been 42.8fps if the flight data recorder was disabled
2020-01-08 21:03:18.375 INFO TACVIEW.DLL: DCS World simulation is taking 87.5% of CPU
2020-01-08 21:03:18.375 INFO TACVIEW.DLL: DCS GetWorldObjects is taking 11.5% of CPU
...
--- End code ---
BuzyBee:
That IS too many entries in the log. I will look into it and let you know!
BuzyBee:
Can you please send me the whole log? By PM or by email at support @ tacview.net please
aemvee:
Of course. It's in the mail. It would be great to have option to disable all INFO and still show ERROR, WARNING messages.
BuzyBee:
I didn't receive anything yet. I was going to check your profiling period. Default is 600 (seconds). If yours is set to 0 for some reason it could cause the issue you are describing.
TACVIEW.DLL: Config={bookmarkShortcut=0, clientTelemetryPassword="", compressionLevel=0, dataRecordingEnabled=1, debugModeEnabled=1, hostTelemetryPassword="",
playbackDelay=0, profilingPeriod=600, realTimeTelemetryPort=42674, recordClientsSessionsEnabled=0, remoteControlPassword="", remoteControlPort=42675}
Navigation
[0] Message Index
[#] Next page