VC10 Professional - Standard, Super & RAFCompatibility: Flight Simulator X, FSX: Steam Edition, P3D v4, v3, v2, v1
Just Flight's VC10 Professional collection for FSX and P3D includes accurately modelled Standard and Super civilian variants as well as the C1K, K3 and K4 military variants in a variety of liveries covering their time in airline and RAF service.
The VC10 is widely regarded as one of the most graceful jet airliners ever created, with its long slim fuselage, clean angled-back wings and graceful swept-back tail surfaces.
The aircraft was designed by Vickers-Armstrongs to fly on long-distance BOAC routes between the UK and Africa and needed to be able to operate from hot and high airports with short runways. This resulted in an aircraft with superb performance, second only to the supersonic Concorde in terms of speed for a jet airliner. The VC10 was introduced into RAF service in 1965, operating in the transport, cargo and in-flight refuelling roles, until its retirement in 2013, nearly 50 years later.
VC10 Professional for FSX and P3D includes accurately modelled Standard and Super civilian variants and C1K, K3 and K4 military variants of the VC10 in a variety of liveries covering their time in airline and RAF service.
The detailed virtual cockpit features 3D instruments, authentic wear and tear and all four flight crew positions (Captain, Co-Pilot, Flight Engineer and Navigator) modelled in high detail.
Comprehensive but easy-to-use systems are simulated, including a realistic fuel system with transfer and jettison functionality, an autopilot with pitch and bank hold, an autothrottle with IAS and MACH hold capabilities and simulated powered flying control units (PFCUs).
Realistic engine start procedures are possible with ground air supply and cross-bleed, and autostart (Ctrl+E) compatibility allows you to get airborne quickly. Custom-coded electrical, fuel, hydraulic, pressurisation and navigation systems, including a new Delco Carousel IV-A Inertial Navigation System (INS) unit, will keep even experienced pilots busy!
The VC10 is brought to life with distinctive Rolls-Royce Conway engine sounds and accurate flight dynamics based on input from ex-VC10 crew and real-world performance and handling data.
Detailed DescriptionINCLUDED MODELSFive accurately modelled civilian and military variants, built using real-world aircraft plans and access to real aircraft:
BOAC Standard VC10 (Type 1101)
Super VC10 - more powerful Conway engines, additional fuel capacity and a longer fuselage
VC10 C1K transport/tanker - Standard VC10 fuselage with Super VC10 wings, engines and tail, main-deck cargo door, wing-mounted refuelling pods
VC10 K3 tanker - Super VC10 with main-deck cargo door, centreline hose drum unit (HDU) and wing-mounted refuelling pods, sealed passenger doors
VC10 K4 tanker - Super VC10, no main-deck cargo door, centreline hose drum unit (HDU) and wing-mounted refuelling pods
MODEL FEATURES Many detailed animations, including:
- Accurate landing gear operations
- Authentic flaps/slat action
- Variable-incidence tailplane
- Windshield wipers (separate Captain and Co-Pilot controls)
- Passenger doors (fore and aft) and cargo doors (port and starboard)
- Animated pilots
- Thrust reverser doors on outboard enginesRetractable taxi/landing lights
- Refuelling hoses
Ground equipment (air stairs and baggage carts)
Specular map to give realistic light effects on the aircraft surfaces
Bump mapping to give a more realistic 3D effect to aircraft liveries
COCKPIT 3D cockpit with virtually all the hundreds of switches, knobs and levers animated and functional. Many gauges are modelled in 3D for smooth operation.
All four flight crew positions modelled (Captain, Co-Pilot, Flight Engineer and Navigator)
Cockpit textures feature wear and tear to produce an authentic environment
Cockpit lighting with atmospheric instrument backlighting
Special 'baked' textures have been used to present a well-used look and feel to the cockpit area and controls
Fully modelled Flight Engineer station with fuel, engine, electrical, anti-ice and hydraulic controls (automatically configured in a 'ready for take-off' state when the aircraft is first loaded, allowing you to get airborne within seconds)
Many features have been added to help with usability such as a switch to hide the control yokes for a better view of the instruments and pre-set angled views for the overhead panel, centre pedestal and Flight Engineer station
Animated Captain's arm-rest for improved visibility of centre pedestal
Ability to integrate third-party weather radar
Split flap/slat lever with the ability to extend slats without deploying flaps
NAV 1/2 and ADF 1/2 radios feeding CDIs, VOR and ADF indicators for easy navigation
GPS unit included for easy navigation
Numerous warning annunciators will illuminate on fault detection and a functional engine fire warning and protection/extinguishing system are built into the cockpit
Animated cockpit side windows
SYSTEMS Custom-coded fuel system with wing and centre tanks, fuel transfer and jettison, cross-feed and LP/HP cock controls
Custom-coded autopilot with pitch and bank hold, ability to navigate via VOR/GPS and autothrottle with IAS/MACH hold capabilities
Thrust-reverse system which, like the real aircraft, is only available on outboard engines
Realistic trim lever operation with rate of tailplane movement proportional to the rate of trim lever displacement from the central position
Aircraft configuration system that will allow you to choose between 'cold & dark' or 'ready for take-off'
Fully compatible with default control assignments (lighting controls, autopilot controls, HP cock levers etc.) and [Ctrl]+[E] autostart
Realistic engine start procedures using ground air supply and cross-bleed
Simulated powered flying control units (PFCUs) loss of electrical power or manual isolation of PFCUs will render flying controls (ailerons, elevator, rudder and spoilers) inoperative, as in the real aircraft. Each control surface can be individually isolated.
Custom-coded Delco Carousel IV-A Inertial Navigation System (INS)
Many other custom systems engine management, electrical, hydraulic, pressurisation, lighting and navigation
LIVERIESEach variant is supplied in a wide variety of liveries covering its time in airline and military service.
Standard VC10 British Airways G-ARVM (circa 1976)
British Airways G-ARVM (red tail)
BOAC G-ARVF (circa 1964)
BOAC G-ARVC (circa 1966)
BOAC G-ARVC (circa 1974)
Gulf Air A40-VI
Gulf Air A40-VK
Just Flight house livery
Nigeria Airways 5N-ABD
Government of the United Arab Emirates G-ARVF
Super VC10 BOAC
BOAC Cunard
BOAC Golden
British Airways
British Airways (BOAC scheme)
Vickers Prototype
East African Airways
VC10 C1K Royal Air Force, 101 Sqn, Modern Grey
Royal Air Force, 10 Sqn, White/Grey
Royal Air Force, 101 Sqn, 40 Years of VC10
Royal Air Force, 101 Sqn, 90th Anniversary
Royal Air Force, 101 Sqn, 95th Anniversary
Royal Air Force, 101 Sqn, Camouflage
Royal Air Force, 101 Sqn, Gulf War, 'The Empire Strikes Back'
VC10 K3 Royal Air Force, 101 Sqn, Modern Grey
Royal Air Force, 101 Sqn, Hemp
VC10 K4 Royal Air Force, 101 Sqn, Modern Grey
Royal Air Force, 101 Sqn, Hemp
OTHER FEATURES Realistic and accurate flight dynamics based on real world performance and handling data, and input from ex-VC10 crew
The distinctive Rolls-Royce Conway engines have been captured to give the utmost realism in full stereo
Comprehensive PDF manual with panel guide and tutorial
PSD Paint Kit included so you can create your own paint schemes
Get it hereJUST FLIGHT VC10 Jetliner Standard post here