Translations for our friends around the world.

The Flight Sim Store Warning!!!!

Author Topic: Milviz: KA 350i  (Read 6970 times)

0 Members and 1 Guest are viewing this topic.

Offline Asid

  • HAVOC
  • *
  • Posts: 21565
Re: Milviz: KA 350i
« Reply #15 on: December 21, 2019, 04:09:56 PM »
KA350i for P3Dv4



Compatibility: Prepar3D v4.5+
Home page
Forum



King of the skies.

"Every system (Powerplant, Propellers, Electrical, Hydraulic, Fuel, and Bleed Air) if it can be simulated, it is, and it is correct."
- 350i instructor pilot


Representing new heights of power and durability, the KA350i delivers truly inspiring performance!

With unparalleled versatility, the KA350i can take off from major airports or short gravel runways, and operates effortlessly at high–altitudes and under extreme weather conditions.

Inside, the KA350i's redesigned cabin and collection of cutting-edge amenities creates a experience that is second to none, offering class leading comfort and unsurpassed interior styling.

On the flight deck, the PL21 integrated avionics suite leads the way in providing a truly intelligent avionics package that has put the KA350i at the top of every pilot’s wish list!


Beyond study-level - an unrivaled simulation

Own a piece of flight sim history!

The MilViz KA350i has earned its place in the annals of virtual aviation by having arguably the longest development of any finished sim. Its first release was famously withdrawn for not quite meeting the MilViz standards of excellence. This was followed by an infuriatingly long development period, during which more features were added, standards of fidelity were further raised, and the word 'soon' was redefined on more than one occasion.

Now, we present the long awaited KA350i, complete with PL21, FMS-3000, and more.

Impressively In-Depth
So, where did that time go? The KA350i PL21 pilot training manual has over 650 pages which, together with other reference sources, have been painstakingly translated into over 75,000 lines of custom code.

With our dedication to providing the best in detail and features, we are confident that our new KA350i is incredibly close to the real aircraft.

With precise, detailed modelling, beautiful texturing inside and out, superb systems replication, and a sound set recorded from a real 350i, we have created a totally immersive simulation that's accurate and enjoyable to fly!

Fly By The Book
Allowing the pilot to properly feel and truly enjoy the twin 1050 horsepower PT6A's that pull the aircraft though the air with speed and confidence was paramount to this project.

All functions and characteristics emulate the real-world classic turbine exactly. If you have experienced them in real life you will recognise the distinctive start up, and the way power, sounds, temperature and internal pressures are all meticulously co-ordinated.

Engine model = Pratt & Whitney PT6A-60A
Engine Power = 1050 HP @ 1700 RPM
Propeller = 4 bladed, constant speed.
Propeller model = Hartzell B4P10012S

Custom modelled systems:
•   Startup procedure
•   In-Flight different start procedure
•   Custom specific sounds for entire startup/shutdown sequence, both external and internal.
Sound volume is user configurable with MVAMS.
•   Realistic propeller rotation at engine startup & shutdown.
•   Engine Performance modeled following real engine data from different tables.
•   Engine failures due to limits exceeded (random)
•   Cold & Hot weather operations realistically simulated
•   Fuel System totally simulated
•   Custom Electrical System, including

Intelligent Avionics
We've outfitted the flight deck of our 350i with the same state-of-the-art avionics that grace the real 350i, offering the most complete PL21 simulation available today, providing easy-to-master navigation, VNAV capability, terrain and weather radar, systems monitoring, integrated checklists, and more. We've combined this with an extemely accurate and fully functional FMS-3000, allowing you to take full control over your flight planning.

Navigraph Compatible
We understand the desire to match your flight plan to the real world, which is why we've made our FMS Navigraph compatible. If you have a Navigraph subscription, you may upload the very latest data, but non-subscribers fear not, we have included a full set of not-quite-up-to-date Navigraph data to keep you on track in the meantime.


Special Features:
•   Fully featured FMS-3000, including SID/STAR support, airway support, performance entry, LNAV and VNAV, and many extended features
•   Fully featured PL21, including radars, checklists, composite mode
•   Faithfully reproduced systems and avionics, including checklist functionality
•   Terrain awareness and warning system (TAWS+)
•   Custom RealLight night lighting, landing lights and custom effects
•   TrueGlass dynamic rain effects
•   Chart viewer system
•   Includes 5 highly detailed liveries
•   True to life turboprop emulation with accurately modelled PT-6A behaviours
•   High quality sound set recorded from a real 350i
•   High quality external model with high resolution PBR textures
•   High quality internal model complete with custom 3D gauges
•   Stunning custom icing, with realistic de-icing boot effects
•   Highly detailed product manuals included
•   Tested and vetted by 4 experienced 350i pilots (and one instructor!)


Fully Tested

"Every system (Powerplant, Propellers, Electrical, Hydraulic, Fuel, and Bleed Air) if it can be simulated, it is, and it is correct."
- 350i instructor pilot


MVAMS Integration

Our MVAMS utility runs outside the simulator providing the means to incrementally update individual products to quickly address issues and make fixes when required, without having to have our customers download and reinstall new versions of the aircraft. This allows our customers to quickly discover and install any pending updates for their aircraft, ensuring that they are completely up-to-date with our latest fixes, changes, or technology.









Downloads

Manual
Detailed operating manual for the KA350i for P3Dv4: here

PBR Paint Kit:
High quality HD paint kit to create your own liveries here


An internet connection is required for product activation


         



I stand against Racism, Bigotry and Bullying

Offline Asid

  • HAVOC
  • *
  • Posts: 21565
Re: Milviz: KA 350i
« Reply #16 on: December 21, 2019, 11:20:07 PM »
All Hail the King


It is with great pleasure that we announce the release of the Milviz KA350i. Years in the making, this in-depth simulation is sure to bring enjoyment to a simulator near you.




I stand against Racism, Bigotry and Bullying

Offline Asid

  • HAVOC
  • *
  • Posts: 21565
Re: Milviz: KA 350i
« Reply #17 on: December 23, 2019, 12:45:08 AM »




































































I stand against Racism, Bigotry and Bullying

Offline Asid

  • HAVOC
  • *
  • Posts: 21565
Re: Milviz: KA 350i
« Reply #18 on: December 24, 2019, 03:12:01 AM »
Support/Hotfix Status
Tue Dec 24, 2019

v1.0.1_191223


From the developers:

Hello folks,

As we are a few days out from release, the reports have come in (as anticipated). We are working on a hotfix for some CTDs and minor inconveniences that will release tonight. We will be addressing some of the other larger concerns (hardware mapping, etc.) in the days after Christmas.

Download the latest installer (773MB) from the Milviz support forum

We appreciate everyone's feedback and patience as we iron out the initial teething issues. The changelog is below. Enjoy your holiday everyone!

Thanks,

Collin Biedenkapp,
Technical Director


Changelog:

FMS Changes
-Fixed runway/approach text alignment
-Fixed intermittent CTD when modifying the flight plan
-Fixed a CTD when clicking a previously selected approach while transitions are displayed
-Fixed an issue preventing proper filtering of certain approaches
-Fixed an issue preventing the full name of approach variations from appearing
-Fixed using the same waypoint for entry and exit on an airway stringing the entire airway
-Fixed LLSK1 on MCDU MENU not working
-Fixed LLSK6 on IRS CONTROL not working
-Fixed a bug that could cause issues with FA legs
-Fixed an enroute hold issue
-Fixed inability to enter default transition altitude

Systems Changes
-Removed invalid MV_TAWS gauge entry
-Fixed an EGPWS/TAWS crash
-Fixed excessive EGPWS/TAWS resource usage with certain scenery

PL21 Changes
-Fixed a time display bug
-Fixed a TCAS bug


I stand against Racism, Bigotry and Bullying

Offline Asid

  • HAVOC
  • *
  • Posts: 21565
Re: Milviz: KA 350i
« Reply #19 on: December 29, 2019, 04:06:41 PM »
KA Service Pack
28th December 2019

A service pack for the KA350i is in development.

Among the improvements are more options for controller configuration, new code allowing FMS settings to persist from flight to flight, and bug-fixes aplenty.


I stand against Racism, Bigotry and Bullying

Offline Asid

  • HAVOC
  • *
  • Posts: 21565
Re: Milviz: KA 350i
« Reply #20 on: December 30, 2019, 11:33:16 PM »
MilViz KA350i Pre-flight and Engine Start
30 Dec 2019




Our friendly instructor pilot runs through the pre-flight and engine start-up routines.





I stand against Racism, Bigotry and Bullying

Offline Asid

  • HAVOC
  • *
  • Posts: 21565
Re: Milviz: KA 350i
« Reply #21 on: December 31, 2019, 12:02:28 AM »
MilViz KA350i Pre-flight and Engine Start pt.II
30 Dec 2019




Part 2 of the pre-flight and engine start-up routines.



I stand against Racism, Bigotry and Bullying

Offline Asid

  • HAVOC
  • *
  • Posts: 21565
Re: Milviz: KA 350i
« Reply #22 on: December 31, 2019, 12:03:44 AM »
MilViz KA350i Basic Flight Plan
30 Dec 2019




Our friendly instructor pilot runs shows how to set up a basic flight plan in the FMS.

More detailed tutorials will be coming soon.



I stand against Racism, Bigotry and Bullying

Offline Asid

  • HAVOC
  • *
  • Posts: 21565
Re: Milviz: KA 350i
« Reply #23 on: January 01, 2020, 11:00:59 PM »
MilViz King Air 350i Promotional
1 Jan 2020





"Representing new heights of power and durability, the KA350i delivers truly inspiring performance!

With unparalleled versatility, the KA350i can take off from major airports or short gravel runways, and operates effortlessly at high–altitudes and under extreme weather conditions.

Inside, the KA350i's redesigned cabin and collection of cutting-edge amenities creates a experience that is second to none, offering class leading comfort and unsurpassed interior styling.

On the flight deck, the PL21 integrated avionics suite leads the way in providing a truly intelligent avionics package that has put the KA350i at the top of every pilot’s wish list!

"Every system (Powerplant, Propellers, Electrical, Hydraulic, Fuel, and Bleed Air) if it can be simulated, it is, and it is correct." - 350i instructor pilot"


I stand against Racism, Bigotry and Bullying

Offline Asid

  • HAVOC
  • *
  • Posts: 21565
Re: Milviz: KA 350i
« Reply #24 on: January 03, 2020, 11:02:12 PM »




I stand against Racism, Bigotry and Bullying

Offline Asid

  • HAVOC
  • *
  • Posts: 21565
Re: Milviz: KA 350i
« Reply #25 on: January 09, 2020, 01:57:28 PM »
KA350i Version 1.0.2 Beta
Thur Jan 09 2020

V1.0.2 Beta (786MB)


From the developers:

Testing and Feedback Team,

A beta of version 1.0.2 is now available.

Please install and test this version. It contains quite a number of fixes and improvements. We are doing a formal beta on it to ensure it reaches the public polished and ready. As always, you will need a serial key to install it.


Thanks,

Collin Biedenkapp,
Technical Director


Changelog:

Changes from 1.0.1

FMS Changes
-Fixed cycle dates showing yellow at all times
-Fixed broken "NEW HOLD" LSK
-Fixed reverse wind entry
-Fixed issue with entering small negative coordinates
-Fixed typos/display inaccuracies on the ARRIVAL DATA page
-Fixed broken duplicate waypoint selection on PERF TRIP page
-Fixed incorrect elevation display on ARRIVAL DATA page
-Fixed incorrect default hold data
-Fixed airport position initialization not entering departure airport
-Added RX## waypoint system for VECTOR approaches
-Added "/ RWY" display on LEGS page

Systems
-Minor sound improvements
-Various improvements

PL21
-Various fixes

Visual
-Various fixes


I stand against Racism, Bigotry and Bullying

Offline Asid

  • HAVOC
  • *
  • Posts: 21565
Re: Milviz: KA 350i
« Reply #26 on: January 11, 2020, 02:45:48 PM »
KA350i Version 1.0.3 Beta
Sat Jan 11 2020

V1.0.3 Beta (786MB)


From the developers:

Testing and Feedback Team,

A beta of version 1.0.3 is now available.

Please install and test this version. It contains quite a number of fixes and improvements. We are doing a formal beta on it to ensure it reaches the public polished and ready. As always, you will need a serial key to install it.


Thanks,

Collin Biedenkapp,
Technical Director


Changelog:

Changes from 1.0.2  beta

FMS Changes
-Corrected runway extension waypoint behavior
-Fixed overly restrictive filtering behavior
-Fixed incorrect departure/arrival/approach filtering
-Fixed broken SEC FPLN ROUTE MENU link
-Fixed SEC FPLN page change behavior
-Fixed labeling of SEC FPLN DEPART/ARRIVE pages
-Fixed ability to select transitions when not displayed

Systems
-Removed invalid panel.cfg entry
-Removed invalid aircraft.cfg light entries
-Removed "repair" and "modify" installer options to prevent unintentional de-activation

PL21
-Various fixes


I stand against Racism, Bigotry and Bullying

Offline Asid

  • HAVOC
  • *
  • Posts: 21565
Re: Milviz: KA 350i
« Reply #27 on: January 14, 2020, 03:41:36 PM »
MilViz KA350i Pre-flight and Engine Start pt.III
13 Jan 2020




Part 3 of the pre-flight and engine start-up routines, including checklist.



I stand against Racism, Bigotry and Bullying

Offline Asid

  • HAVOC
  • *
  • Posts: 21565
Re: Milviz: KA 350i
« Reply #28 on: January 18, 2020, 12:07:10 AM »
KA350i Version 1.0.4 Beta
Fri Jan 17, 2020

V1.0.4 Beta


From the developers:

Testing and Feedback Team,

A beta of version 1.0.4 is now available.

Please install and test this version. It contains quite a number of fixes and improvements. We are doing a formal beta on it to ensure it reaches the public polished and ready. As always, you will need a serial key to install it.


Thanks,

Collin Biedenkapp,
Technical Director


Changelog:

Changes from 1.0.3  beta

FMS Changes
-Corrected "NBDs" typo
-Fixed procedure name designations
-Corrected (as much as possible) the behavior of the "RWY" text on the legs page
-Fixed localizer data not showing all runways
-Fixed inability to use LSK-copy method to copy waypoints further down the flight plan

Systems
-Corrected ATC ID of liveries
-Various fixes

PL21
-Various fixes

Visual
-Various fixes


I stand against Racism, Bigotry and Bullying

Offline Asid

  • HAVOC
  • *
  • Posts: 21565
Re: Milviz: KA 350i
« Reply #29 on: January 21, 2020, 03:05:56 PM »
Real KA-350i FMS videos
Mon Jan 20

By jwhill07
Real world KA350 pilot

Thought it might be a good idea for information purposes I have a few vids from real KA 350i 3000 FMS v4.0. I know the milviz 350i is not complete, these videos are for information only. If not aloud please remove post.

Videos from 2013 KA-350 serial FL858 first generation proline 21 Collins 3000 FMS 4.0

Enjoy














Just a note I said ARC mode instead of ROSE mode that was a mistake, also the hold entry will not change while on ground. didn't have a lot of time to make better vids sorry.

 

I stand against Racism, Bigotry and Bullying

 

Milviz Advanced Series T-38A Talon

Started by AsidBoard FSX/P3D/X-Plane

Replies: 2
Views: 4533
Last post August 19, 2019, 01:52:48 PM
by Asid
Free Milviz P-38 Red Bul

Started by AsidBoard FSX/P3D/X-Plane

Replies: 0
Views: 3665
Last post July 04, 2016, 02:54:55 PM
by Asid
Milviz C-130 WIP

Started by Red2112Board FSX/P3D/X-Plane

Replies: 6
Views: 5435
Last post September 02, 2016, 04:52:49 PM
by Red2112
Milviz Ju 87 Stuka: Free

Started by AsidBoard FSX/P3D/X-Plane

Replies: 0
Views: 3087
Last post April 28, 2017, 02:34:21 PM
by Asid
Milviz DHC-2 Beaver

Started by AsidBoard FSX/P3D/X-Plane

Replies: 13
Views: 8549
Last post September 07, 2017, 07:53:52 PM
by Asid