Translations for our friends around the world.

The Flight Sim Store Warning!!!!

The Flight Sim Store Warning!!!!



http://www.flightsimstore.com/

This store is not processing transactions properly.
They have been ignoring customer emails/tickets.
Quite a few Flight Sim devs have removed their products from this store.


I am NOT buying from them at this point. BEWARE!

Author Topic: Maddog X  (Read 1247 times)

0 Members and 1 Guest are viewing this topic.

Online Asid

  • HAVOC
  • *
  • Posts: 14551
Maddog X
« on: January 11, 2018, 05:59:23 PM »


FlythemaddogX is the simulation of the McDonnel Douglas MD-82 powered with JT8D-217/A engines, with cockpit configuration EFIS + FMS in the "pink" background variant. Created by Leonardo SH


http://www.flythemaddog.com/


Maddog X Tutorials - 01 - Preliminary Cockpit Preparation



Published on Dec 9, 2017

Learn how to power up the aircraft from a Cold and Dark state.

These procedures are verified according to a specific operator.
Different operators might use different Standard Operating Procedures.

I stand against Racism, Bigotry and Bullying

Online Asid

  • HAVOC
  • *
  • Posts: 14551
Re: Maddog X
« Reply #1 on: February 11, 2018, 06:52:04 PM »
Manuals released


Quick Guide

User Manual

I stand against Racism, Bigotry and Bullying

Online Asid

  • HAVOC
  • *
  • Posts: 14551
Re: Maddog X
« Reply #2 on: February 14, 2018, 02:47:36 PM »
Prices
A clarification is needed: today we spoke with simMarket and the prices we told you yesterday were considering the included 22% italian VAT. So the prices you'll see on simMarket are:

- 64bit: the equivalent of 70€ + your country's VAT;
- 32bit: the equivalent of 57€ + your country's VAT.
The 5€ discount will apply for all February on the retail price without VAT.

Thanks.

I stand against Racism, Bigotry and Bullying

Online Asid

  • HAVOC
  • *
  • Posts: 14551
Re: Maddog X
« Reply #3 on: February 14, 2018, 02:49:08 PM »
Fly the Maddog X will be available in two versions via simMarket:

64bit edition (P3Dv4.1-v4.2)

32 bit edition (FSX/FSX:SE/P3Dv3.4)

There will be a 5€ discount for both versions during the first week upon release. News for the customers of the legacy version shortly.

Thanks for your patience and your warm interest in Fly the Maddog X.

I stand against Racism, Bigotry and Bullying

Online Asid

  • HAVOC
  • *
  • Posts: 14551
Re: Maddog X
« Reply #4 on: February 14, 2018, 02:51:05 PM »
Maddog X Official Preview


Published on Feb 12, 2018

I stand against Racism, Bigotry and Bullying

Online Asid

  • HAVOC
  • *
  • Posts: 14551
Re: Maddog X
« Reply #5 on: February 14, 2018, 03:00:03 PM »
Fly the Maddog X downloads

http://www.flythemaddogx.com/en/media.html

•   Quick reference guide
[02/13/18 rev.1.01]

•   Load manager and setup reference guide
[02/13/18 rev.1.01]

•   Installation and activation guide 32bit
[02/13/18 rev.1.00]

•   Installation and activation guide 64bit
[02/13/18 rev.1.00]   

•   Advanced training notes
[02/13/18 rev 1.00]

I stand against Racism, Bigotry and Bullying

Online Asid

  • HAVOC
  • *
  • Posts: 14551
Re: Maddog X
« Reply #6 on: February 27, 2018, 02:39:41 PM »
Fly the Maddog X 1.0.3

Fly the Maddog X 1.0.3 is now available for download in your account at simMarket as a new installer. Customers are strongly encouraged to upgrade.

Uninstall 1.0.0 with the uninstaller, reinstall new. Activation data will be kept so no need to register again.

Changelog:
- Load Manager issues with certain Windows localizations;
- ‘Brake stuck’ issue in FSX (32bit edition);
- Added the option to disable RealLight (64bit edition) to improve performance with video cards equipped with less than 4GB.

I stand against Racism, Bigotry and Bullying

Online Asid

  • HAVOC
  • *
  • Posts: 14551
Re: Maddog X
« Reply #7 on: February 27, 2018, 02:41:24 PM »
Paintkit

The white layered paintkit is now available for download. Check Downloads page. http://www.flythemaddogx.com/en/media.html

I stand against Racism, Bigotry and Bullying

Online Asid

  • HAVOC
  • *
  • Posts: 14551
Re: Maddog X
« Reply #8 on: April 11, 2018, 12:45:03 AM »
Fly the Maddog X version 1.1.0
10/04/18
 

Leonardo SH is glad to announce the availability of Fly the Maddog X version 1.1.0. All customers should have already received the notification email from simMarket. You will have to download and reinstall the whole package from simMarket (login -> your account -> your orders). Check the KB to see the correct procedure for upgrading: http://www.flythemaddog.com/hesk/knowledgebase.php?article=2

Keep in mind that additional liveries must be installed again.

We are also proud to announce that Fly the Maddog X is now supported by Mark Foti's 'SimServer - Remote CDU' version 4.0: https://library.avsim.net/esearch.php?DLID=204106

We think this is a great addition (thanks Mark) and a great companion to be used with Fly the Maddog X!

We want to thank you all, expecially those which has supported us since first release and believed in us. Development is not over, and we will continue bringing new features and improvements in the future.

Yes, we are a small devteam, but this doesn't mean we lack the skills or the knowledge to improve further, or listen to our customers. More news soon.

CHANGE LOG 1.1.0

****FIXES****
- Exterior model: fixed mapping of the apu exhaust port.
- Exterior model: smoother flap animation.
- Manuals: updated manuals to reflect new changes in version 1.1.0.
- MCDU: upgraded MCDU operating system to PS4058350911.
- MCDU: reworked VNAV descent logic, descent profile calculation, vertical deviation indicator.
- Panel: fixed/improved systems, including correct engine startup timing.
- Panel: fixed issue of mouse wheel repeating toggling in 3+ position switches.

****NEW FEATURES****
- General: added pause at TOD (from the MaddogX in addon menu).
- General: added support for Mark Foti's 'Remote CDU'.
- Exterior model: added in Load Manager the option for external flood lights for switching between dynamic lights/legacy lights/off.
- Load Manager: RealLight setting in Load Manager will now disable just RealLight (TrueGlass can be disabled from its own addon menu inside the sim).
- Load Manager: resetting the activation in Load Manager now automatically unlocks the transaction in Leonardo customer database server, allowing a new installation.
- Load Manager: added an optional feature within the failure page to have a text message displayed, inside sim, when a random failure is armed or triggered.
- MCDU: added handling of constraint above/below (i.e. 8000A12000B).
- MCDU: added 'gates' for 'init pos' in 'POS' page.
- MCDU: added correct calculation of 'OPT ALT' in 'FMS CRZ' page.
- Panel: added left/right mouse clicks for rotating knobs (where applicable, exception are SPD, HDG and ALT knobs).
- Panel: added the option in Load Manager for having internal flood lights using the P3D4 fx engine, instead of True Light (P3DV4 only). Selecting this option will also add the 'alt thndr' and 'floor' lights to the VC. Please read the manual about how to use this feature.
- Views: added inside/outside wing views for left and right wing (subcategory: Aircraft).


I stand against Racism, Bigotry and Bullying

Online Asid

  • HAVOC
  • *
  • Posts: 14551
Re: Maddog X
« Reply #9 on: April 26, 2018, 02:38:47 PM »
Open Beta program has just started. Version 1.2b260 is available for download.

Check our forum (accessible only from validated accounts, you must have registered with the email used for activating the Maddog X on load manager).

http://www.flythemaddog.com/forum/index.php?showtopic=9791

CHANGELOG 1.2b260

****FIXES****
- FDE: fine tuning of ground effect and idle taxi power.
- FDE: contact points tweak.
- FMS: ETA differences between leg page and prog page (EN ROUTE WPT).
- FMS: display of dntrk on ND when not intercepting leg.
- FMS: missing 'NOT IN DATABASE' message when LSKeing non-existing airway.
- FMS: pressing 'ERASE' after changing crz alt would not undo the change.
- FMS: wrong fix altitude calculation for certain descent/approaches.
- FMS: improved 'OVRD' logic.
- LOAD MANAGER: TrueGlass disabled when RealLight disabled.
- LOAD MANAGER: conflict of RealLight setting and FS2Crew setting.
- LOAD MANAGER: wrong calculation of TOI for limited wing fuel schedule.
- PANEL: engine spool-up speed decreased.
- PANEL: wrong range on ND CM2 WX image when both ND ON (AS WXRadar).
- PANEL: no radar image for range 80 or above (AS WXRadar).
- PANEL: CDU 2 not working with CDU Remote.
- PANEL: blurry breakers texture behind CM1 seat.
- PANEL: missing breakers flood light.
- PANEL: missing vc light .fx file in FSX installer.
- PANEL: wrong QNH in speed chart.
- PANEL: incomplete aircraft registration text in speed chart.
- PANEL: external wing view with vc in 'wide' mode.

****NEW****
- FMS: separated transition altitude / transition level.
- FMS: support for reading airport-based transition altitude/level from Navigraph Airac.
- FMS: LSKeing dntrk info (FIX page) will copy on scratchpad user wpt data.
- FMS: second FIX page.
- FMS: when configuring aircraft 'Ready to Fly' from add-on menu route and data are not reset.
- LOAD MANAGER: Load/Save of setup and configuration file.
- LOAD MANAGER: Load Manager checks online for new versions (manual download and install).

I stand against Racism, Bigotry and Bullying

Online Asid

  • HAVOC
  • *
  • Posts: 14551
Re: Maddog X
« Reply #10 on: May 07, 2018, 04:18:36 PM »
Open beta 1.2b264 is online

Check official forums (you must have an account registered with the same email address used for activation).

Upgrade procedure:
1) be sure to have 1.1.0/1.2b260 installed and activated in your FSX/P3D.
2) backup addon livery entries in the aircraft.cfg.
3) download and install the upgrade to 1.2b264.
4) add liveries again to the aircraft.cfg.
5) start the load manager at least once and save, even if not making any change.
4) As simple as that. You're done.

CHANGELOG 1.2b260 -> 1.2b264

****FIXES****
- FDE: tuned single-engine in-flight performances.
- PANEL: various bug fixes.
- PANEL: improved memory management to avoid CTD in low memory conditions.
- PANEL: chrono and dme display backlight tied to panel knob.
- PANEL: repeating GSCM entries in DFDR file.

****NEW****
- FMS: selecting a new altitude in the MCP within +-4000ft of CRZ alt will copy altitude in scratchpad.
- PANEL:new ESDP display font.
- PANEL: changed DME display to the 'LCD' type.

I stand against Racism, Bigotry and Bullying

Online Asid

  • HAVOC
  • *
  • Posts: 14551
Re: Maddog X
« Reply #11 on: May 21, 2018, 12:01:24 AM »
Update V1.2b265

From the developers
"We have released a new official version in our forum: you can download either the 'incremental' update, that will upgrade your Fly the Maddog X from 1.1.0 to 1.2b265 without the need of uninstall and reinstall (addon textures must be reinstalled after the upgrade); or you can download the 'full' installers, that requires you to uninstall/reinstall the product again. You can also download the full installers in your account at simMarket."

Check our forum for more details: http://www.flythemaddog.com/forum/index.php

Users are highly encouraged to upgrade to 1.2b265. Next AIRAC from Navigraph will be compatible with Fly the Maddog X 1.2b265 only, due changes in the database format.

CHANGELOG 1.1.0 -> 1.2b265.

****FIXES****
- FDE: tuned single-engine in-flight performances.
- FDE: fine tuning of ground effect and idle taxi power.
- FDE: contact points tweak.
- FMS: ETA differences between leg page and prog page (EN ROUTE WPT).
- FMS: display of dntrk on ND when not intercepting leg.
- FMS: missing 'NOT IN DATABASE' message when LSKeing non-existing airway.
- FMS: pressing 'ERASE' after changing crz alt would not undo the change.
- FMS: wrong fix altitude calculation for certain descent/approaches.
- FMS: improved 'OVRD' logic.
- LOAD MANAGER: TrueGlass disabled when RealLight disabled.
- LOAD MANAGER: conflict of RealLight setting and FS2Crew setting.
- LOAD MANAGER: wrong calculation of TOI for limited wing fuel schedule.
- PANEL: engine spool-up speed decreased.
- PANEL: wrong range on ND CM2 WX image when both ND ON (AS WXRadar).
- PANEL: no radar image for range 80 or above (AS WXRadar).
- PANEL: CDU 2 not working with CDU Remote.
- PANEL: blurry breakers texture behind CM1 seat.
- PANEL: missing breakers flood light.
- PANEL: missing vc light .fx file in FSX installer.
- PANEL: wrong QNH in speed chart.
- PANEL: incomplete aircraft registration text in speed chart.
- PANEL: external wing view with vc in 'wide' mode.
- PANEL: green fuel panel font scaling.
- PANEL: various bug fixes.
- PANEL: improved memory management to avoid CTD in low memory conditions.
- PANEL: chrono and dme display backlight tied to panel knob.
- PANEL: repeating GSCM entries in DFDR file.

****NEW****
- FMS: selecting a new altitude in the MCP within +-4000ft of CRZ alt will copy altitude in scratchpad.
- FMS: separated transition altitude / transition level.
- FMS: support for reading airport-based transition altitude/level from Navigraph Airac.
- FMS: LSKeing dntrk info (FIX page) will copy on scratchpad user wpt data.
- FMS: second FIX page.
- FMS: when configuring aircraft 'Ready to Fly' from add-on menu route and data are not reset.
- LOAD MANAGER: Load/Save of setup and configuration file.
- LOAD MANAGER: Load Manager checks online for new versions (manual download and install).
- PANEL: new ESDP display font.
- PANEL: changed DME display to the 'LCD' type.

I stand against Racism, Bigotry and Bullying