Translations for our friends around the world.

Click on banner for Tacview website

Author Topic: Tacview 1.6.0 official thread  (Read 6770 times)

0 Members and 1 Guest are viewing this topic.

Offline Vyrtuoz

  • Moderator
  • *****
  • Posts: 188
  • Tacview Developer
    • Tacview The Universal Flight Analysis Tool
Tacview 1.6.0 official thread
« on: April 06, 2017, 02:07:29 PM »


Tacview 1.6.0 is now available to everyone!


Download: HERE


The long awaited real-time telemetry is here! Use it with DCS World, FSX, Prepar3D, or X-Plane to record and review in real-time a flight in progress. An first draft of the instructor remote control is also available. This tool enables you to control up to four simulators, to assist trainee pilots and reduce their workload.

To prevent cheating, real-time telemetry may be disabled during network sessions depending on the host preferences.

These two new features go naturally well together: Use the real-time telemetry to watch in real time your trainee from outside and inside the cockpit. Help him/her using the remote control to pause its flight simulator and actuate some of its aircraft controls. In the next update, you will be able to directly bind joystick and keyboard to remote control commands.

All Tacview network features are independent and can be combined the way you want. For example, you can combine the real-time telemetry and the online-debriefing to review, with your fellow squadrons leaders, in real-time, a network battle in progress like a red-flag training.

In addition, many updates and fixes are introduced in this version to better enjoy flight review for all your favorite simulators.

While several surprises are on their way for this year, the next major step will be Tacview 2.0. This new version will offer a fully revamped UI, and a will include most of the improvements which have been requested over the years.

Meanwhile several updates are still planned for Tacview 1.6 and maybe 1.7, to offer a smooth transition while waiting for 2.0. For example, you will soon get an integrated static objects editor to easily add navaids to a battlefield and will be able to display analog cockpit instruments to get more intuitive and faster reading while analysing the quality of a flight.

 epPKd-xFyLc

FEATURES & CHANGES
  • Real-time telemetry for DCS World, FSX, Prepar3D, and X-Plane
  • Instructor Remote Control to assist trainee pilots
  • Added support for iLevil csv files
  • Dynamic adjustment of the export frequency to increase accuracy of important objects like player aircraft
  • Added an optional 5 minutes playback delay for DCS World exporter
  • Integrated Ostsee 3.2.6 theater for Falcon 4.0
  • Integrated Pillars of Hercules theater 0.7.8.2 U2 for Falcon 4.0
  • Integrated Israel 1.0.3 terrain and database for BMS 4.33 U3
  • Trail size can now be defined more accurately and is explicitly displayed in a tooltip
  • Added attitude (roll and pitch) charts to analyze pilot induced oscillations
  • Added CAS to charts
  • Added an additional larger auto scale option
  • Added an option to choose the compression level for DCS World recorder
  • By default, debug level events are not displayed anymore in the console, use /debug:on to show them

FIXES
  • Fixed a crash in DCS World when returning to spectator mode
  • Tacview was not properly playing back flights taking place before 1970 like WWII flights
  • X-Plane Real-time object teleportation is now gracefully handled
  • It was not possible to copy/paste a shortcut containing a bullseye
  • It was not possible to select or highlight a bullseye during online debriefing
  • Mirage 2000 AA missiles names were mixed up
  • Charts horizontal axis graduations were not properly displayed
  • ACMI files export path will be preserved when installing a new version of Tacview
« Last Edit: April 06, 2017, 03:00:38 PM by Admin »
funny
0
informative
0
Thanks
0
No reactions
No reactions
No reactions
Click.gif

Offline xaoslaad

  • New member
  • *
  • Posts: 3
  • New member
Re: Tacview 1.6.0 official thread
« Reply #1 on: April 07, 2017, 04:12:40 PM »
It looks like the port is now configurable globally in the application rather than per instance like I was asking in the beta 1 thread.

If you're running two instances (say release and alpha) on the same server there's no way to set the port per instance. Rather than having this configured in the application can it be moved to the Tacview Plugin in on the Special tab in the DCS settings where it would make more sense?
funny
0
informative
0
Thanks
0
No reactions
No reactions
No reactions

Offline Vyrtuoz

  • Moderator
  • *****
  • Posts: 188
  • Tacview Developer
    • Tacview The Universal Flight Analysis Tool
Re: Tacview 1.6.0 official thread
« Reply #2 on: April 07, 2017, 08:06:14 PM »
In Tacview 1.6.1 you will have the possibility to choose the real-time telemetry and remote control ports. You will also be able to define a password to authorize some people to record real-time telemetry despite an active anti-cheat delay.

I did not have the time yet to add theses option because of DCS World menus limitations.
funny
0
informative
0
Thanks
0
No reactions
No reactions
No reactions
Click.gif

Offline xaoslaad

  • New member
  • *
  • Posts: 3
  • New member
Re: Tacview 1.6.0 official thread
« Reply #3 on: April 07, 2017, 10:09:45 PM »
Awesome! Sounds good and I look forward to it.
funny
0
informative
0
Thanks
0
No reactions
No reactions
No reactions

Offline Foxy

  • New member
  • *
  • Posts: 17
  • New member
Re: Tacview 1.6.0 official thread
« Reply #4 on: April 13, 2017, 11:45:48 PM »
Hey Vyrtuoz.

I'm a member of a falcon BMS flying community using Tacview for our event's debreifing but for some reasons since 1.6.0 we're experiencing troubles to connect to an online debriefing.
We used a lot this functions in the past with the previous versions of tacview and without any problems.
42673 port is forwarded for the host. We did try several hosts but no luck.

Can you have a look at that function please ?
funny
0
informative
0
Thanks
0
No reactions
No reactions
No reactions

Offline Vyrtuoz

  • Moderator
  • *****
  • Posts: 188
  • Tacview Developer
    • Tacview The Universal Flight Analysis Tool
Re: Tacview 1.6.0 official thread
« Reply #5 on: April 15, 2017, 03:01:29 PM »
In Tacview 1.6, I have introduced a new network protocol which was necessary for the real-time telemetry.

This means that Tacview 1.6 online debriefing is not compatible with Tacview 1.5.4 online debriefing. It should work fine if all the participants are running Tacview 1.6.

Could that be the source of your issue?

If not, can you share me some screenshot of the error message displayed by Tacview?
funny
0
informative
0
Thanks
0
No reactions
No reactions
No reactions
Click.gif

Offline Foxy

  • New member
  • *
  • Posts: 17
  • New member
Re: Tacview 1.6.0 official thread
« Reply #6 on: April 15, 2017, 07:05:50 PM »
Nope we also have the problem even when everybody is using 1.6.0
For this reason we reversed back at 1.5.4 for the moment.

From what I remember there is no error message we're just not able to connect.
will try again ASAP
funny
0
informative
0
Thanks
0
No reactions
No reactions
No reactions

Offline Vyrtuoz

  • Moderator
  • *****
  • Posts: 188
  • Tacview Developer
    • Tacview The Universal Flight Analysis Tool
Re: Tacview 1.6.0 official thread
« Reply #7 on: April 15, 2017, 07:21:20 PM »
Indeed, it looks like the online debriefing is not working as expected. I am going to investigate and publish a fix as soon as possible. Sorry for the inconvenience.
funny
0
informative
0
Thanks
0
No reactions
No reactions
No reactions
Click.gif

Offline Foxy

  • New member
  • *
  • Posts: 17
  • New member
Re: Tacview 1.6.0 official thread
« Reply #8 on: April 16, 2017, 03:22:18 AM »
No problem and thx for the great support.
I'm just hoping it's not a big deal and that you will be able to fix it without too much pain  :thumbsup
funny
0
informative
0
Thanks
0
No reactions
No reactions
No reactions

Offline Vyrtuoz

  • Moderator
  • *****
  • Posts: 188
  • Tacview Developer
    • Tacview The Universal Flight Analysis Tool
Re: Tacview 1.6.0 official thread
« Reply #9 on: April 20, 2017, 02:14:22 PM »
Thanks to your valuable feedback, the online debriefing has been fixed in Tacview 1.6.1 beta 1.

http://tacview.net/download/beta

Sorry for the inconvenience.
funny
0
informative
0
Thanks
0
No reactions
No reactions
No reactions
Click.gif

Offline Foxy

  • New member
  • *
  • Posts: 17
  • New member
Re: Tacview 1.6.0 official thread
« Reply #10 on: April 21, 2017, 09:51:40 AM »
Thx a lot !

By the way I saw that basic support of tacview has been added in Il2 ! Amazing  :thumbsup
I was surprised when I saw the ACMI file in my Il2 tracks folder but what a good surprise  :roker
funny
0
informative
0
Thanks
0
No reactions
No reactions
No reactions

Offline VampireNZ

  • New member
  • *
  • Posts: 1
  • New member
Re: Tacview 1.6.0 official thread
« Reply #11 on: April 25, 2017, 07:31:18 AM »
Hi - sorry not sure if I should just ask here or start a thread. I am new to Tacview and just purchased it for use with DCS which I am just getting back into with 2.0 and Nevada, awesome software and very useful for analysing your engagements!
I was just woindering if there was any specific reason IAS is not displayed for the enemy aircraft? I have it selected for the tab and it shows for my A/C but nothing for the enemy. I have to enable TAS as well for both and calculate from there.
funny
0
informative
0
Thanks
0
No reactions
No reactions
No reactions

Offline Vyrtuoz

  • Moderator
  • *****
  • Posts: 188
  • Tacview Developer
    • Tacview The Universal Flight Analysis Tool
Re: Tacview 1.6.0 official thread
« Reply #12 on: April 25, 2017, 02:22:53 PM »
DCS World exports the IAS only for the local (player) aircraft. AI aircraft do not expose this information.

Maybe the estimated CAS in Tacview, will bring you closer to the IAS for your computations.
funny
0
informative
0
Thanks
0
No reactions
No reactions
No reactions
Click.gif

Tags:
     

    Tacview 1.8.7 is out!

    Started by Vyrtuoz

    Replies: 1
    Views: 2401
    Last post November 15, 2021, 11:59:27 PM
    by Asid
    Tacview 1.5.3 beta 2 is available

    Started by Vyrtuoz

    Replies: 0
    Views: 3351
    Last post December 22, 2016, 08:44:17 PM
    by Vyrtuoz
    Tacview 1.8.0 beta 10 is available Now

    Started by Asid

    Replies: 0
    Views: 2292
    Last post May 05, 2019, 02:50:15 PM
    by Asid
    Tacview with Fog of War

    Started by tomekldc

    Replies: 0
    Views: 1516
    Last post November 17, 2020, 03:15:01 PM
    by tomekldc
    Tacview 1.9.3 beta 3 is available Now

    Started by Asid

    Replies: 0
    Views: 1772
    Last post July 17, 2023, 01:03:56 AM
    by Asid