Translations for our friends around the world.

Author Topic: Tweaking Scourge of War: Waterloo  (Read 9111 times)

0 Members and 1 Guest are viewing this topic.

Offline Asid

  • HAVOC
  • *
  • Posts: 26361
Tweaking Scourge of War: Waterloo
« on: October 18, 2016, 04:18:39 PM »
Tweaking

The graphics settings for AntiAliasing and for Anisotropy must be set directly in the SOWWL.ini file. The default location for this file is My Documents/SOWWL. This file can be edited with Notepad or any other text editing program. The text to look for is:

[Initialization]
AntiA=2
Anso=2
funny
0
informative
0
Thanks
0
No reactions
No reactions
No reactions

I stand against Racism, Bigotry and Bullying

Offline Asid

  • HAVOC
  • *
  • Posts: 26361
Re: Tweaking Scourge of War: Waterloo
« Reply #1 on: October 30, 2016, 02:46:34 PM »
Removing annoying sounds

Some of the sounds can be annoying in the menus. Like the sword sound or shot being fired. You can remove or replace them easily.

Examples:
Sword sheathing = "WL_NSDSheath.wav"
Musket shot = "WL_NSDShot.wav".

To remove
Navigate to the base/sounds folder and rename the file "WL_NSDSheath.wav". Putting an "x" in front of it is fine

To Replace
Rename the new file using the original file name. Keep it short

Steam Version:
\SteamLibrary\steamapps\common\Scourge of War Waterloo\Base\Sounds

Matrix version:
\Scourge of War Waterloo\Base\Sounds



Solution from Saddletank :)
funny
0
informative
0
Thanks
0
No reactions
No reactions
No reactions

I stand against Racism, Bigotry and Bullying

Offline General Sandman

  • Hero Member
  • *****
  • Posts: 756
Re: Tweaking Scourge of War: Waterloo
« Reply #2 on: January 01, 2018, 07:23:23 PM »
Tweaking

The graphics settings for AntiAliasing and for Anisotropy must be set directly in the SOWWL.ini file. The default location for this file is My Documents/SOWWL. This file can be edited with Notepad or any other text editing program. The text to look for is:

[Initialization]
AntiA=2
Anso=2

What are the maximum settings? Is it 16?
ATM I setup 8 for each.
Are there fixed levels like 2,4,8-16 or can one choose a free value?
funny
0
informative
0
Thanks
0
No reactions
No reactions
No reactions



Who we were

“We were the ones who knew but did not understand, well informed but without insight, overloaded with factual data but poor in experience and wisdom. So we went, not stopped by ourselves."

Based on Roger Willemsen R.I.P.

Offline Asid

  • HAVOC
  • *
  • Posts: 26361
Re: Tweaking Scourge of War: Waterloo
« Reply #3 on: January 01, 2018, 09:01:15 PM »

What are the maximum settings? Is it 16?
ATM I setup 8 for each.
Are there fixed levels like 2,4,8-16 or can one choose a free value?

I have tried 8 and 16 and no difference is seen.
funny
0
informative
0
Thanks
0
No reactions
No reactions
No reactions

I stand against Racism, Bigotry and Bullying

Offline Aj

  • New member
  • *
  • Posts: 4
Re: Tweaking Scourge of War: Waterloo
« Reply #4 on: March 23, 2019, 12:54:32 AM »
Tweaking

The graphics settings for AntiAliasing and for Anisotropy must be set directly in the SOWWL.ini file. The default location for this file is My Documents/SOWWL. This file can be edited with Notepad or any other text editing program. The text to look for is:

[Initialization]
AntiA=2
Anso=2

All I have for initialisation in that folder is this, am I missing something

[initialization]
full screen=1
screen res=1
funny
0
informative
0
Thanks
0
No reactions
No reactions
No reactions

Offline General Sandman

  • Hero Member
  • *****
  • Posts: 756
Re: Tweaking Scourge of War: Waterloo
« Reply #5 on: March 23, 2019, 08:22:46 AM »
Tweaking

The graphics settings for AntiAliasing and for Anisotropy must be set directly in the SOWWL.ini file. The default location for this file is My Documents/SOWWL. This file can be edited with Notepad or any other text editing program. The text to look for is:

[Initialization]
AntiA=2
Anso=2

All I have for initialisation in that folder is this, am I missing something

[initialization]
full screen=1
screen res=1


You could add the lines by yourself.
funny
0
informative
0
Thanks
0
No reactions
No reactions
No reactions



Who we were

“We were the ones who knew but did not understand, well informed but without insight, overloaded with factual data but poor in experience and wisdom. So we went, not stopped by ourselves."

Based on Roger Willemsen R.I.P.

Offline Asid

  • HAVOC
  • *
  • Posts: 26361
Re: Tweaking Scourge of War: Waterloo
« Reply #6 on: March 23, 2019, 01:42:41 PM »
funny
0
informative
0
Thanks
0
No reactions
No reactions
No reactions

I stand against Racism, Bigotry and Bullying

Offline Aj

  • New member
  • *
  • Posts: 4
Re: Tweaking Scourge of War: Waterloo
« Reply #7 on: April 14, 2019, 10:53:20 PM »
I edited it with the capitals etc.. it plays fine but when I exit the game and recheck the .ini file it has dropped the capitals and rearranged itself to look like this. Is it still OK, it plays OK and to be quite frank I can't tell the difference

[initialization]
antia=2
full screen=1
anso=2
screen res=1
funny
0
informative
0
Thanks
0
No reactions
No reactions
No reactions

Tags:
     

    Scourge of War Waterloo SDK

    Started by Asid

    Replies: 1
    Views: 4260
    Last post September 02, 2015, 10:28:50 AM
    by Asid
    Scourge of War Waterloo Use of Slider Toolbar

    Started by Asid

    Replies: 0
    Views: 4340
    Last post June 17, 2016, 12:16:19 AM
    by Asid
    Scourge of War Waterloo SDK V2

    Started by Asid

    Replies: 0
    Views: 6004
    Last post July 11, 2017, 07:20:00 PM
    by Asid