NextRC Sim

[Asid]

Update history 1.727 - 1.658


    - 1.727 (27.07.2021)
    - new helicopter: ALIGN T-Rex 650X Dominator
    - new fixed-wing model: Pinkus Extra 0,85m (free download plan at www.flugmodell-magazin.de)
    - Piro Trainer: The Ghost Sticks are showing the required stick movement for hovering and piruette circles (normal, inverted, both directions of rotation and both circle directions). Enable them in tab Settings > Output Device and select there also your stick mode. The trainer is only active when none of the automatic flight control systems are activated. Press the key 'v' to open the flight recorder. Click on 'Menu' and load 'KE Piro-Training'. This video shows how I learned the piruette circle. With this training I can then fly all piruette figures completely automatically and without further basic training. The Ghost Sticks will show you the required stick movements as you learn the pirouette circle. Of course, the Ghost Sticks only serve as a guide, because in the end you should only look at the helicopter and concentrate on the four necessary control directions. Don't give up too soon as it can take a few days for your brain / fingers to automatically make the needed controls.
    - compiled on Unity 2019.4.28f1

    - 1.722 (21.05.2021)
    - new fixed-wing model: Flinky Turbo 0,87m (free download plan at www.flugmodell-magazin.de)
    - compiled on Unity 2019.4.26f1

    - 1.715 (28.04.2021)
    - new helicopter: SAB Goblin RAW 700
    - fixed-wing models: Aileron differential
    - GPS Attitude and Attitude mode for helicopters and multicopters updated
    - compiled on Unity 2019.4.25f1

    - 1.711 (08.04.2021)
    - new fixed-wing model: Fauvette 2,60m (free download plan at www.flugmodell-magazin.de)
    - fixed-wing models: updated spoiler and flaps. Please reassign in Settings > Input Device > Functions
    - extended helicopter rescue function (Tab Training)
    - GPS altitude control available for all helicopter sizes
    - timescale window shortcut: u
    - compiled on Unity 2019.4.23f1

    - 1.704 (05.03.2021)
    - new fixed-wing model: Pinkus-Export 0,78m (free download plan at www.flugmodell-magazin.de)
    - compiled on Unity 2019.4.21f1, which fixes rare startup problems.
    - fixed-wing models: Depending on the model, ailerons can be set up or down using the flap channel.
    - the assignment of functions in Settings > Input Device > Functions can now be canceled.
    - info window with short instructions for the hover trainer.

    - 1.702 (02.02.2021)
    - new fixed-wing model: STOL Buschtrottel 0,90m (free download plan at www.flugmodell-magazin.de)
    - compiled on Unity 2019.4.19f1
    - fixed-wing models: Elevator trim in the model settings

    - 1.700 (24.01.2021)
    - new fixed-wing model: Graupner Extra 300L 1,6m
    - compiled on Unity 2019.4.18f1 (new PhysX libraries, fixes graphic bugs, ...)
    - Windows: new SHA256 certificate

    - 1.678 (31.12.2020)
    - new fixed-wing model: ESKY Albatross 2,6m
    - new fixed-wing model: FPVWRA Sport Wing
    - new multicopter: A3FUN II A610
    - Italian language support
    - further improvements, also for online flight meetings

    - 1.674 (20.11.2020)
    - new fixed-wing model: Robbe Limit Pro 1,7m
    - new scenery: Snohomish Cascade Model Helicopter Club II
    - Spanish language support
    - the key o (camera mouse look) is now deactivated in the chat window
    - inverse collective pitch setting in tab input and output device (positive pitch)
    - updated multicopter GPS functions
    - fixed-wing physics expanded
    - the Limit Pro has an aileron landing brake (input channel: landing flaps)

    - 1.669 (25.09.2020)
    - new fixed-wing model: Robbe Rasant 0,9m
    - new scenery: Mission Wings MFC

    - 1.667 (08.09.2020)
    - new fixed-wing model: Tomahawk Aviation Integral 2,5m
    - motor force of fixed-wing models is shown in Newtons
    - flaps (Settings > Input Device > Functions)
    - scenery updated: Les Aigles de Battice RCA (cloudy). Delete the scenery in the scenery folder. Then install the update and download the scenery again.

    - 1.663 (04.08.2020)
    - OMPHOBBY M2 got a additional canopy design
    - the simulator shows an error message if it is blocked by a virus scanner

    - 1.662 (30.07.2020)
    - new helicopter: SAB Goblin Kraken 580, setup by Jonas Schelpe
    - OMPHOBBY M2 got two additional canopy designs

    - 1.659 (22.06.2020)
    - new helicopter: Mikado Logo 550 SE, setup by Mirko Cesena
    - new helicopter: OMPHOBBY M2
    - F3C Training Pattern (Training tab, Traffic Cones section)

    - 1.658 (06.06.2020)
    - new helicopter: ALIGN T-Rex 700X, setup by Luca Pescante
    - new fixed-wing model: Pilot-RC Extra NG 2,61m

[Asid]

NextRC Sim  V2.0
01 Dec 2024

There is a ne V2.0 released and being updated.

There is a discount if you update from V1.x

I will post details etc very soon.

Regards

[Asid]

I will be updating to V2.x
03 Dec 2024

I will start posting about V2.x and how I get on with it.

Regards

[Asid]

NextRC Sim  V2.0
24 Feb 2025




Update history 2.066 - 2.003


2.066 (24.02.2025)

    - The rotor light reflections, together with the HDR calculations, require a little more computing time. This function can now be deactivated in the Settings tab > Graphics, Rotor Light Reflections option.
    - Some further improvements.

2.065 (19.02.2025)

    - The simulator is now calculated in HDR. HDR stands for High Dynamic Range and is an image technology that primarily improves contrast and colors.
    - Updated calculation of the moving center of gravity for fixed-wing models.
    - Physical calculation of rotor disk light reflections in helicopters and multicopters.

2.061 (17.10.2024)

    - new helicopter: ESKY 300 V2
    - second canopy design for XLPower Specter 700 Nitro

2.059 (29.08.2024)

    - new helicopter: GOOSKY RS7, setup by Fabian Klo?

2.057 (12.07.2024)

    - new helicopter: XLPower Specter 700 Nitro, setup by Kenny Ko

2.055 (03.05.2024)

    - new fixed-wing model: Autoplane 1,19m (free download plan at www.flugmodell-magazin.de)

2.052 (27.09.2022)

    - new helicopter: GOOSKY S2 Legend, setup by Biao.D

2.049 (12.09.2022)

    - new helicopter: RVE Dubhe E700, setup by Mr. Junjie Li

2.047 (13.08.2022)

    - new helicopter: RVE Merak 750 Future, setup by Mr. Junjie Li
    - new helicopter: RVE Merak 750, setup by Mr. Junjie Li
    - compiled on Unity 2019.4.40f1

2.043 (27.05.2022)

    - new helicopter: XLPower Nimbus 550, setup by Kenny Ko

2.041 (28.04.2022)

    - new helicopter: ALIGN T15, setup by Luca Pescante
    - compiled on Unity 2019.4.38f1

2.039 (05.04.2022)

    - there was a menu error on Apple OSX systems with M1 processors. It's fixed now.
    - compiled on Unity 2019.4.37f1

2.037 (16.03.2022)

    - new helicopter: EC 135 (ALIGN T-Rex 500L Dominator)
    - 100 hour trophy: It's a golden SAB Kraken 700

2.033 (18.02.2022)

    - new fixed-wing model: Hiperbipe 1,10m (free download plan at www.flugmodell-magazin.de)
    - some libraries updated
    - modified setup for fixed-wing models
    - flight time and crash statistics (shortcut: h)
    - compiled on Unity 2019.4.36f1

2.024 (17.12.2021)

    - new fixed-wing model: Robbe Charter 1,47m
    - compiled on Unity 2019.4.34f1

2.018 (29.11.2021)

    - new fixed-wing model: Swee' Pea 0,73m (free download plan at www.flugmodell-magazin.de)
    - You can use more than one custom scenery: Simply create another folder with the desired scene name in 'C:\Users\ user name \Documents\neXt\CustomScenery' in which you place the cube map files. To load the 'Custom Scenery', click on 'Settings' at the bottom left of the scenery tab and select the desired folder. The position of the sun in each custom scenery can be set individually.
    - compiled on Unity 2019.4.33f1

2.011 (14.11.2021)

    - new helicopter: XLPower Specter 700 V2, setup by Kenny Ko, Valerio Bottero and Marco Ceze.
    - new multicopter: ALIGN M6 (Agrar Multicopter/Drone)
    - FPV option now also in the Camera tab
    - compiled on Unity 2019.4.32f1

2.008 (30.09.2021)

    - new fixed-wing model: Krill Aircraft SebArt Katana S 2.60m

2.007 (11.09.2021)

    - new helicopter: SAB Goblin Kraken 580 Nitro
    - fixed-wing models: The position of the COG is now influenced by the propeller gyro effect.
    - compiled on Unity 2019.4.30f1

2.003 (17.08.2021)

    - new fixed-wing model: Chopper 0,75m (free download plan at www.flugmodell-magazin.de)
    - Goblin RAW 700 canopies: red, orange, pink and blue
    - ALIGN T-Rex 650X: setup by Luca Pescante
    - New program name: 'neXt - RC Flight Simulator', previously 'neXt - rc Heli Simulator'. The v1.x settings are automatically adopted on Windows and Linux systems. Under OSX they have to be copied from 'Macintosh HD/Users/ user name /Library/Containers/com.Eiperle-CGM.CGM-rc-Heli-Simulator/Data/neXt/prefs.ini' to 'Macintosh HD/Users/ user name /Library/Containers/com.Eiperle-CGM.CGM-RC-Flight-Simulator/Data/neXt/prefs.ini'.
    - Windows systems: alternative user folder possible. Define the path in a text file with the name custom.txt and place this file in the neXt program folder and there in the AssetBundles folder. Preset is: C:\Users\ user name \Documents\neXt\Assets\
    - compiled on Unity 2019.4.29f1